Leading 10 usual forklift accidents ， forklift operation need to pay attention to these issues ！.
Leading 10 usual forklift accidents ， forklift operation need to pay attention to these issues ！.
Blog Article
Don't underestimate the forklift at the workplace. If the procedure is bad, there will certainly be serious accidents in minutes, and there are numerous accidents including forklifts.
Situation 1: The forklift cargo blocked the chauffeur's sight, and the person in front could not be found, resulting in a rolling crash.
Instance 2: In order to keep the equilibrium of the forklift when lifting heavy goods, the employees utilized their body weight as the weight, which virtually created casualties.
Situation 3: The width of the forklift cargo exceeds the allowed size of the course and holds on the roadside shelf, which nearly triggers an accident.
Case 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift driver did not see the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift chauffeur does not wear the safety belt, the forklift lifter drops and the chauffeur is squashed when the forklift surrender.
Case 7: The forklift vehicle driver did not put on a seat belt and dropped from the lorry when it rolled over and was squashed.
Forklift procedure should pay attention to these issues ：.
Begin.
1. Before starting, observe the environments, and after confirming that there are no barriers that impede the safety of driving, beep the horn first and afterwards start.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be secure before starting.
3. When the forklift begins with a load, the vehicle driver ought to initially confirm that the lots is stable and trusted.
4. The begin has to be sluggish and constant.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the pole ought to be slanted in reverse. .
2. Do not lift the fork expensive when driving. When entering and leaving the task website or while driving, be careful that there will be no barriers overhead. When the load is taking a trip, the fork has to not be increased expensive, which will impact the security of the forklift. .
3. After dumping, the fork ought to be reduced to the regular driving position before driving. .
4. When turning, if there are pedestrians or automobiles close by, the driving signal should be issued first. High-speed doglegs are banned. High-speed doglegs will create the lorry to lose side security and topple. .
5. When the forklift is downhill, it is strictly forbidden to shut off the fire and slide, and it is prohibited to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to comply with the traffic rules in the factory and should keep a specific security distance from the car in front. .
7. When the forklift is running, the tons needs to be in the lowest setting that does not impede the driving, and the gantry ought to be appropriately tilted back. The tons shall not be raised except when piling or filling. .
8. The elevation of the tons need to not block the chauffeur's sight. In special circumstances, when the thing influences the forward vision, drive at a reduced rate when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it should drive securely at a reduced rate when going into the manufacturing workshop area. .
11. When the forklift is raised, lifted or driven, it is forbidden for workers to base on the fork to hold items and play a stabilizing role. .
12. If troubles are located, they will certainly be fixed and reported in a timely way, and they will never operate with health problems or hide them.
packing and dumping.
1. When fork-loading things, the range in between both forks should be changed as needed to make the load of the two forks well balanced and not skewed, and one side of the product must protest the shelf. .
2. It is forbidden to work with a solitary fork or make use of a fork top or pull. In unique conditions, safety and security indication have to be set up to advise surrounding pedestrians. .
3. In the process of packing and dumping products, the forklift should be braked with the brake. .
4. The speed of the vehicle ought to be slow and consistent. Take care not to roll the wheels on the dunnage, so as not to extend the rolled items and hurt individuals. .
5. When utilizing a fork to fork the goods, the fork must be as deep as possible under the load, and it must be kept in mind that the fork suggestion should not touch various other items or objects. The lots ought to be stabilized with minimal back tilt of the gantry to ensure that the load does not glide backwards. The mast can be tilted forward a little when the tons is lowered to enable easy positioning of the tons and extraction of the forks. .
6. It is prohibited to fork products at broadband and hit tough things with the fork head. .
7. When the forklift is working, it is restricted for people to loaf the fork, so as to avoid the collapse of the goods and hurt individuals. .
8. Overloading is forbidden, and it is forbidden to make use of forks to raise employees to participate in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not enabled to make use of the brake inertia to slip, place, round or roll things. .
10. It is not allowed to utilize forks to select, turn pallet unload.
Leaving .
1. It is prohibited to leave the forklift when the things on the fork impend. Before leaving the forklift, you must unload the goods or lower the fork framework.
2. Draw the hand brake deal with to dead or depress the hand brake button.
3. The engine is turned off and the power is cut off. (Except for unique scenarios, such as the driver does not leave the car's view and does not go beyond 1 min).
4. Eliminate the trick. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance ought to be checked, and gas, lubing oil and air conditioning water should be included.
2. Inspect the safety and security efficiency of beginning, running and stopping.
3. Examine whether the lights and horn signals are total and reliable.
4. Throughout the operation of the forklift, inspect whether the pressure and temperature are normal.
5. After the forklift is running, the external leakage should additionally be checked and the seals should be replaced in time.
Forklift Safety Operation Specifications.
1. You must examine prior to Electric Forklift Truck for Warehouse leaving the automobile;.
2. When you encounter a person before you during driving, you ought to send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the low point of the freight should be 0.3 m ~ 0.4 m above the ground;.
5. The turning need to not be also sharp to avoid the tendency of " complimentary switching";.
6. Running up and down the incline must be slow and uniform, and no switching on the slope is enabled.
7. Do not drive across the slope. When the slope is greater than 10%, the lorry must Stand-on Electric Pallet Stacker be driven in reverse when declining;.
8. When the forklift employees carry the goods and move forward, if they come across large or hefty items and most likely to the driver's view, they must take the turning around exercise
.
The "Eight Prohibitions" should be followed in the procedure.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for cross country driving.
3. It is not enabled to pick up the goods by passing on the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not permitted to utilize inertia pressure to pick up the goods.
6. It is not enabled to make use of braking pressure to exile round or easy-to-roll items.
7. It is not permitted to bring people to deal with the pallet or fork, and it is purely prohibited to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Auto parking is not permitted under the list below problems.
1. Curves, narrow roads, railway crossings;.
2. Sections with a longitudinal incline greater than 5%.
3. When there is an challenge on one side of the road, the opposite side of the section with the exact same size as the obstacle ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844